Typical build output
The following is a printout of the console from a typical build following the instructions on Installation Instructions page.
Specifically this output is from the command:
lando startLando build log
Let's get this party started! Starting app boston...
node version 8 is a legacy version! We recommend upgrading.
landoproxyhyperion5000gandalfedition_proxy_1 is up-to-date
Starting boston_patterns_1 ... done
Starting boston_appserver_1 ... done
Starting boston_database_1 ... done
Waiting until database service is ready...
Waiting until appserver service is ready...
Waiting until patterns service is ready...
Waiting until database service is ready...
Waiting until database service is ready...
Waiting until database service is ready...
Waiting until database service is ready...
ref: lando-drupal-post-start.sh
[LANDO] Project Event - post-start
================================================================================
[SUCCESS] Docker containers are now started.
================================================================================
____________ ______________________________________
________________ |.H.H.H.H.H.H.H.H.H.H.H.H.H.H.H.H.H.H.H|
____________________ |______________________________________|
____ ___ _____ ||_~|~|~|~|~|~|~|~|~|~|~|~|~|~|~|_||
| _ \ ___|_ _|_ _| |______________________________|
| | | |/ _ \| | | | | HH |.H.H. Boston .H.H.| HH |
| |_| | (_) | | | | | HH ||~|~|City Hall~|~|| HH |
|____/ \___/___| |_| | __ |__________________| __ |
____________________ | HH |.H.H.H.' '.H.H.H.| HH |
________________ | HH ||~|~|~|!XX!|~|~|~|| HH |
____________ |____|'''''''|~~|'''''''|____|
[INFO] Host is MacOSX
___ __ __ __ __ ______
/ _ )___ ___ __ _ ___ / / ___ _/ /_____ _/ /__ _/ /_____ _/ / / /
/ _ / _ \/ _ \/ ' \(_-</ _ \/ _ `/ '_/ _ `/ / _ `/ '_/ _ `/_/_/_/
/____/\___/\___/_/_/_/___/_//_/\_,_/_/\_\\_,_/_/\_,_/_/\_\\_,_(_|_|_)
Your app has started up correctly.
Here are some vitals:
NAME boston
LOCATION /Users/stellaubaha/Documents/boston.gov-d8
SERVICES appserver, database, patterns
APPSERVER URLS https://localhost:32813
http://localhost:32814
http://boston.lndo.site/
https://boston.lndo.site/
PATTERNS URLS http://localhost:32815
https://patterns.lndo.site/.lando.yml
The log above was generated using lando start with this.lando.yml landofile.
# Acquia friendly mods from https://github.com/lando/lando/issues/105
# See readme in ./build/readme.boston.md
name: boston
recipe: drupal8
config:
php: '7.3'
webroot: docroot
database: mysql:5.7
xdebug: true
drupal: false
services:
patterns:
type: node:8
overrides:
environment:
PORT: "3030"
FRACTAL_PORT: "3030"
labels:
traefik.0.port: "3030"
traefik.docker.network: "landoproxyhyperion5000gandalfedition_edge"
traefik.0.frontend.rule: "HostRegexp:patterns.lndo.site"
globals:
gulp-cli: "latest"
build_as_root:
- printf "\n[LANDO] Node Container Event - build as root\n\n"
- /app/scripts/local/lando-patterns-customize.sh
run:
- printf "\n[LANDO] Node Container Event - run\n\n"
- /app/scripts/local/lando-build-patterns.sh
command: /app/scripts/local/lando-patterns-post-start.sh
database:
type: mysql
portforward: true
host: localhost
run_as_root:
- printf "\n[LANDO] Database Event - run as root\n\n"
- /app/scripts/local/lando-database-customize.sh
creds:
user: drupal
password: drupal
database: drupal
appserver:
type: php:7.3
webroot: docroot
xdebug: true
overrides:
environment:
PHP_IDE_CONFIG: "serverName=boston.lndo.site"
XDEBUG_CONFIG: "remote_enable=1 idekey=PHPSTORM"
config:
conf: xdebug.ini
build_as_root:
- printf "\n[LANDO] Appserver Event - build as root\n\n"
- /app/scripts/local/lando-appserver-customize.sh
build:
- printf "\n[LANDO] Appserver Event - build\n\n"
- /bin/sh -c "composer require drush/drush:^9 --no-update --no-progress --no-suggest --prefer-dist &> /dev/null"
run:
- printf "\n[LANDO] Appserver Event - run\n\n"
- /app/scripts/local/lando-build-drupal.sh -y
tooling:
phpunit:
service: appserver
description: "Run PHP Unit tests: lando phpunit"
drush:
service: appserver
description: "Run drush commands in app container: lando drush <command>"
cmd:
- /app/vendor/bin/drush
drupal:
service: appserver
description: "Run drupal-console commands in app container: lando drupal <command>"
cmd:
- drupal
npm:
service: patterns
description: "Run npm commands in patterns:node container: lando npm <command>"
cmd:
- echo a; cd /app/patterns && npm
node:
service: patterns
description: "Run node commands in patterns container: lando node <command>"
gulp:
service: patterns
description: "Run node:gulp commands in patterns container: lando gulp <command>"
mycli:
service: database
description: "Open mycli prompt in db container: lando mycli"
cmd: "mycli -udrupal -pdrupal"
drupal-sync-db:
service: appserver
description: "Drupal: Copy the remote staging DB into the local DB"
cmd:
- /app/scripts/local/sync.sh 'test'
drupal-pull-repo:
service: appserver
description: "Drupal: Pull the latest Drupal public and private repos from Git"
cmd:
- /app/scripts/local/pull.sh
validate:
service: appserver
description: "Run the Linting and PHPCS routines on the current branch."
cmd:
- /app/scripts/local/validate.sh all
switch-patterns:
service: appserver
description: "Switch the patterns library: 2 = local, 3 = prod, 4 = stage."
cmd:
- /app/vendor/bin/drush drush bcss
events:
post-start:
- appserver: /app/scripts/local/lando-drupal-post-start.sh
.config.yml
The log above was generated using lando start with thisconfig.yml project file.
project:
docroot: ${REPO_ROOT}/${lando_config_webroot}
profile:
name: bos_profile
themes:
- bos_theme
php:
memory_size: 1024M
# Drupal Account Credentials. These are used for installing Drupal.
drupal:
account:
name: admin
password: admin
mail: no-reply@acquia.com
multisite:
# Use 'default' as the name if there are no multisites.
name: default
patterns:
local:
build: true
repo:
name: CityOfBoston/patterns.git
branch: develop
# Where the repo will be cloned to.
local_dir: ${REPO_ROOT}/patterns
travis:
build: false
build:
local:
# Build Type = dev or prod.
type: dev
config:
# Define the folder, relative to the drupal docroot, for config files to be synchronised, no trailing slash.
# aquia requires ./config/default:
# @see https://docs.acquia.com/acquia-cloud/develop/config-d8/
sync: "../config/default"
database:
# Set source to 'initialize' to start a fresh install.
# Otherwise set it to 'sync' (and provide a drush-alias) to sync from the drush-alias environment.
# Tip: Develop environment has database in closest state to the github repo configs.
source: sync
drush_alias: "@bostond8.dev"
host: boston_database_1
port: 3306
travis:
develop:
# With Travis, the type will control what type of build is deployed to Acquia (dev/prod/none).
# none = don't alter modules enabled from configuration
type: dev
suppress_output: 0
database:
# Set source to 'initialize' to start a fresh install.
# Otherwise set it to 'sync' to sync from the drush-alias environment.
source: initialize
drush_alias: "@bostond8.dev"
config:
# Set to 'true' or 'false'. False means no configs will be imported during build/deploy
# Note: if the commit is a hotfix, then configs wont be imported for expediency.
sync: "true"
master:
# With Travis, the type will control what type of build is deployed to Acquia (dev/prod).
# none = don't alter modules enabled from configuration
type: prod
suppress_output: 0
database:
# Set source to 'initialize' to start a fresh install.
# Otherwise set it to 'sync' to sync from the drush-alias environment.
source: initialize
drush_alias: "@bostond8.test"
config:
# Set to 'true' or 'false'. False means no configs will be imported during build/deploy
# Note: if the commit is a hotfix, then configs wont be imported for expediency.
sync: "true"
deploy:
# Each element of this deploy node is a branch in the main CoB repo.
# WARNING, scripts cannot track branches with spaces or dashes ("-") in their name. AVOID and use _ instead.
# If your branchname must have a space or "-", then in this file just remove them (i.e. my-branch = mybranch)
develop:
# Folder in Travis container where deploy files will be "built"
dir: ${REPO_ROOT}/deploy
# Name of the target branch in the Acquia repo. Should be quoted if it contains - or _ or spaces.
deploy_branch: "develop-deploy"
# Path to the drush command in the Travis container.
travis_drush_path: '${REPO_ROOT}/vendor/bin/drush'
# Alias for deploy target Aquia server.
drush_alias: "@bostond8.dev"
# Definition of files that will and wont be copied from build to deploy.
includes_file: ${REPO_ROOT}/scripts/deploy/deploy-includes.txt
excludes_file: ${REPO_ROOT}/scripts/deploy/deploy-excludes.txt
sanitize_file: ${REPO_ROOT}/scripts/deploy/deploy-sanitize-files.txt
# Dry-run (for testing).
dry_run: false
# Whether (and where) to sync the database on the deploy target. NB: copy-db=false means db left intact.
copy_db: false
drush_db_source: "@bostond8.test"
# user:host for (Acquia) git remote to be used for deployment.
acquia_repo: bostond8@svn-29892.prod.hosting.acquia.com:bostond8.git
master:
# Folder in Travis container where deploy files will be "built"
dir: ${REPO_ROOT}/deploy
# Name of the target branch in the Acquia repo. Should be quoted if it contains - or _ or spaces.
deploy_branch: "master-deploy"
# Path to the drush command in the Travis container.
travis_drush_path: '${REPO_ROOT}/vendor/bin/drush'
# Alias for deploy target Aquia server.
drush_alias: "@bostond8.test"
# Definition of files that will and wont be copied from build to deploy.
includes_file: ${REPO_ROOT}/scripts/deploy/deploy-includes.txt
excludes_file: ${REPO_ROOT}/scripts/deploy/deploy-excludes.txt
sanitize_file: ${REPO_ROOT}/scripts/deploy/deploy-sanitize-files.txt
# Dry-run (for testing).
dry_run: false
# Whether (and where) to sync the database on the deploy target. NB: copy-db=false means db left intact.
copy_db: false
drush_db_source: "@bostond8.prod"
# user:host for (Acquia) git remote to be used for deployment.
acquia_repo: bostond8@svn-29892.prod.hosting.acquia.com:bostond8.git
# Configuration settings for new git repository.
git:
# [Optional] Set this node (private_repo) if there is a private repo that needs to
# be included as part of the build:
# - It is expected that the repo is hosted on GitHub.
# - The development machine *must* have a valid ssh key for this remote repo.
# - The repo can contain a settings file (e.g. private.settings.php)
# - The folder structure of the private repo must exactly match the folder structure
# of the main repo so that files can be copied across to the correct folders.
private_repo:
repo: CityOfBoston/boston.gov-d8-private.git
branch: develop
deploy_branch: develop
# Where the repo will be cloned to.
local_dir: ${LANDO_MOUNT}/setup/private
# Provide the path to a settings script (relative to the private repo root),
# which will be copied to the main repo and then set up to be called from (i.e. extend)
# the sites main settings.php script.
settings_file: sites/default/settings/private.settings.php
composer:
bin: ${LANDO_MOUNT}/vendor/bin
drush:
bin: ${LANDO_MOUNT}/vendor/bin/drush
cmd: ${LANDO_MOUNT}/vendor/bin/drush -r ${LANDO_MOUNT}/docroot -l default
root: ${LANDO_MOUNT}/docroot
Last updated